pump calpeda NC332-60/180
| pump calpeda NC332-60/180 | |||
| Head: | 3m | ||
| Flow : | 2m3/h | ||
| Pump power: | 0.95kw | ||
| Pump type : | circulating | ||
| Voltage : | 220V | ||
| Pump material : | bronze | ||
| Impeller material : | composite | ||
| Impeller type : | centrifugal | ||
| Pump location : | any | any | |
| Type of connection : | thread | ||
| Spigot diameter : | 2x2inch | ||
calpeda NC33 circulation pump 2-60/180 for hot water
Design:
The pump housing has suction and delivery bells of the same diameter and located on the same shaft (multi-row design).
Brass or cast iron threads on request.
Apply:
For clean fluids without abrasive particles that are not aggressive to pump construction materials.
Use in domestic heating installations.
Operational limits:
Liquid temperature +5°C to +110°C ( -10°C to +110°C for NC3.. 70,80,120).
Ambient temperature is no more than 40°C.
Sound pressure: no more than 43dB(A)
Glycol max: 50% (if glycol is over 20%, check performance data).
Max pressure: 10 bar.
Minimum suction pressure bar: | |||
TYPE | Temperature | ||
50°C | 80°C | 110°C | |
NC3 ..40,50,60 | 0.05 | 0.4 | 1,1 |
NC3 ..70 | 0.05 | 0.4 | 1,1 |
NC3 ..80,85,120 | 0.05 | 0.4 | 1,2 |
Electric Motor:
Asynchronous 2-pole motor, frequency 50 Hz.
Manual 3-speed rev switch.
NC3: mono-phase 230V
Isolate class "H".
IP 44 Protective Device.
pump calpeda NC332-60/180
pump type
innings
pressure
pump power
voltage
pump material
wheel material
pump location
connection type
wheel type
There are no reviews for this product.