Household pump dab GARDENJET-GARDEN-INOX GARDEN-COM
Household pump dab GARDENJET-GARDEN-INOX GARDEN-COMPortable self-priming pumps for agricultural irrigation systems, flushing systems and other applications. The pumps are equipped with a handle for easy carrying and a two-meter power cable complete with plug and switch. They are compact, easy to install, and are capable of providing water supply from storage tanks, wells and wells even if there are air bubbles and a small amount of sand in the water.
TECHNICAL CHARACTERISTICS
- Motor protection degree: IP 44.
- Terminal box protection degree: IP 55.
- Insulation class: F.
- Supply voltage: 1 x 220-240 V/50 Hz.
- Operating range: flow from 0.4 to 5.4 m3/h, pressure up to 54 m .
- Pumped liquid: clean, free of solid and abrasive inclusions, non-viscous, non-aggressive, non-crystallized, with characteristics close to water.
- Liquid temperature range: from 0 to +35°C for domestic use; from 0 to +40°C for other applications.
- Maximum ambient temperature: +40°C.
- Maximum suction depth : 8 m.
- Maximum operating pressure: 6 bar (600 kPa) for Jet and Jetcom
8 bar (800 kPa) for Jetinox - Installation: horizontal, fixed or free position.
- Special versions on request: electric motors for other voltages and/or frequencies.
DESIGN FEATURES
Gardenjet: pump housing – cast iron, engine support – die-cast aluminum.
Garden-com: pump housing – technopolymer, engine mount – die-cast aluminum.
Garden-inox: pump housing – stainless steel steel, engine support – die-cast aluminum.
Impeller and diffuser – technopolymer. Mechanical seal flange – stainless steel steel. Mechanical seal – graphite/ceramic. The pumps are equipped with an air-cooled asynchronous electric motor. To ensure low noise levels and long service life, the rotor rotates on oversized bearings filled with lifelong lubricant. The electric motor has built-in overload protection. The design complies with the requirements of standards CEI 2-3 and CEI 61-69 (EN 60335-2-41).
