Styrofoam EPS 30 "Standard"
A popular brand of foam plastic, the thermal and mechanical properties of which make it possible to use the material for both indoor and outdoor use, depending on the construction tasks.
PHYSICAL AND MECHANICAL PROPERTIES FOAM PLASTIC EPS 30 "STANDARD"
Compressive strength at 10% deformation, MPa, not less than 0.06
Bending strength limit, MPa, not less 0.1
Dry thermal conductivity at 25+5ºС, W/m. K. 0.042
Moisture resistance of plates, % no more 12< /p>
Water absorption in 24 hours, % by volume, not more 3.0
Boundary deviations from the minimum dimensions of slabs , mm
by length 5
width 5
thickness 2
APPLICATION:
between masonry;
insulation balconies and loggias;
insulation of walls from the outside by various methods;
to create a smooth surface of the walls from the inside (under plaster);
insulation of places through which cold penetrates into room: eaves joints, doorways, roofs, floors.
Styrofoam EPS 30 "Standard"
