Sewage pump dab FEKA 300, 600
Sewage pump dab FEKA 300, 600Designed for pumping wastewater from buildings and sites in private, commercial and industrial areas in accordance with the European standard EN 12050-1.
TECHNICAL CHARACTERISTICS
- Operating range: flow from 1 to 16 m3/h, pressure up to 10.2 m.
- Liquid temperature range: from 0 °C to +35 °C for domestic use.
- Pumped liquid: wastewater from septic tanks.
- Maximum permissible diameter of solid particles in the pumped liquid: FEKA 600 25 mm
- Minimum dehumidification level: FEKA 600 A 175 mm
FEKA 600 NA 38 mm - Maximum immersion depth: ;7 m.
- Max. operating time without water: 1 min.
- Protection degree: IP 68.
- Insulation class: F
DESIGN FEATURES
Pump body, impeller and suction cover – technopolymer. Motor housing, shaft and screws – stainless steel. A triple gland seal in the oil chamber protects the electric motor from the pumped liquid. The pumps are equipped with a water-cooled asynchronous electric motor and continuous operation (S1). The stator windings are located in a stainless steel motor housing. The rotor rotates on oversized bearings filled with grease for life. The version with a single-phase electric motor has built-in overload protection. To protect the three-phase motor, overload protection must be provided in accordance with current regulations.
Supplied with a standard power cable for single-phase models:
5 meter HO5RN-F cable for: FEKA 600 MA
Cable HO7RN-F 10 meters long for: FEKA 600 M-NA
Standard cable for three-phase models: 5 meters of HO7RN-F cable. The plug standard for single-phase models is SCHUKO EEC VII.
