In-line pump dab CPE-CP-GE-DCPE-DCP-GE
In-line pump dab CPE-CP-GE-DCPE-DCP-GECirculation pumps with in-line connections are designed for heating, air conditioning, cooling and domestic hot water recirculation systems. The MCE/C inverter provides maximum operational flexibility and performance, allowing the pump to automatically adapt to different system requirements and maintain a constant pressure drop.
TECHNICAL SPECIFICATIONS
- Operating range: flow from 1.2 to 230 m3/h, pressure up to 60 m of water . Art.
- Liquid temperature range: from-10 to + 130 °C for DN 40-50, from-10 to + 140°C for other sizes .
- Pumped liquid: clean, free of solid and abrasive inclusions, non-viscous, non-aggressive, non-crystallized, chemically neutral, with characteristics close to water.
- Installation: in horizontal or vertical position with power up to 7.5 kW, from 11 kW only in vertical position. The electric motor is always higher than the hydraulics.
- Max. ambient temperature: +40 °C.
- Max. operating pressure: 16 bar.
- Degree of protection: IP 55.
- Insulation class: F.
- Flanges: PN16.
- Mating flanges on request: DN 40, DN 50, DN 65, DN 80, DN 100, DN 125, DN 150; PN 16.
DESIGN FEATURES
Single and double models are available. The suction and discharge connections are equipped with PN 16 flanges and threaded holes for pressure gauges or control sensors. Pump housing and electric motor support – cast iron, impeller – cast iron or technopolymer depending on the model (models with bronze impeller are available in sizes from DN 65 to DN 150). Hydraulic shaft – stainless steel steel. Mechanical seal graphite/silicon carbide standardized to DIN 24960 with EPDM O-rings. The pumps are equipped with a three-phase, two-pole, air-cooled asynchronous electric motor. To ensure low noise levels and long service life, the rotor rotates on oversized bearings. The design of the electric motor complies with the requirements of CEI 2-3 standards.
