Polyfoam EPS 70 "Elite"
One of the most sought-after brands, which has gained well-deserved popularity due to good thermal protection and a sufficient level of mechanical strength. Perfectly proved itself as a facade insulation of one- and two-story premises and buildings.
PHYSICAL AND MECHANICAL PROPERTIES OF EPS 70 ELITE FOAM br>
Parameter
Compressive strength at 10% deformation, MPa, not less than 0.08
Bending strength limit, MPa, not less than 0, 16
Dry thermal conductivity at 25+5ºС, W/m.K. 0.040
Moisture resistance of boards , % no more 12
Water absorption in 24 hours, % by volume, no more 2,0
Boundary deviations from the minimum dimensions of slabs, mm
by length< span style="white-space:pre"> 5
width 5
width thickness 2
APPLICATION:
external wall insulation using light wet and dry methods;
as a filler in the walls of frame houses, as well as for insulation of such houses from the outside;
p>
between laying bricks;
to create a smooth wall surface from the inside (under plaster);
to insulate ceilings with a light wet method and inter-rafter insulation of roofs;
insulation of balconies and loggias;
insulation of places through which cold enters the room: cornice joints, doorways, floors.
Polyfoam EPS 70 "Elite"
