Sewage pump dab FEKA 2500-2700
Sewage pump dab FEKA 2500-2700Cast iron sewage pumps with a vortex impeller are designed for pumping wastewater with solid inclusions with a maximum diameter of 62 mm.
TECHNICAL CHARACTERISTICS
- Protection degree: IP 68.
- Insulation class: ;F.
- Configuration and operating mode: Continuous operating mode S1 only in a fully immersed state. The standard package includes a 10 m long H07RN-F power cable.
- Operating range: flow from 6 to 48 m3/h, pressure up to 17 m.
- Pumped liquid: non-aggressive waste and drainage water.
- Liquid temperature range: from 0° up to + 40°C.
- Maximum immersion depth: 20 m.
- Installation: vertically, in free position.
- Maximum permissible diameter of solid particles in the pumped liquid: 62 mm.
- Included in delivery: ;flange corresponding to UNI 1092 PN 6.
DESIGN FEATURES
Motor housing, hydraulic part and impeller – cast iron EN GJL 200. Single mechanical seal – silicon carbide/silicon carbide on the hydraulic side in the oil chamber. The pumps are equipped with an asynchronous electric motor. The rotor rotates on oversized bearings filled with grease for life. A version with a moisture detection sensor in the oil chamber is available on request. Single-phase models can be equipped with a built-in float switch for automatic operation.
* Single-phase models are supplied complete with a starting capacitor unit that has built-in overload protection and an electrical power cable with a Schuko plug.
To protect the three-phase electric motor, overload protection must be provided in accordance with current regulations.
