pump calpeda 4SD15/17EC
| pump calpeda 4SD15/17EC | |
| Head: | 67m |
| Delivery: | 12m3/h |
| Pump power: | 4kw |
| Pump type : | borehole |
| Voltage : | 380V |
| Pump material : | AISI304 |
| Impeller material : | polycarbonate |
| Impeller type : | centrifugal |
| Pump location : | submersible |
| pump diameter: | 98mm. |
| Type of connection: | thread |
| Spigot diameter : | 2inch |
Design pump calpeda 4SD15/17EC.
Submersible electric pumps with external casing for deep wells with a diameter of 4" (DN 100 mm) and 6" (DN 150 mm) with AISI 304 stainless steel outer jacket and noryl steps.
Using SD, SDP, SDN pumps.
SD, SDP, SDNВ pumps from an Italian company Calpeda designed for ;household and industrial use, in fire fighting installations, as well as for irrigation.
Operating limits for SD, SDP, SDN pumps.
Water temperature:- no more than 35°C for engines with a diameter of 4".
No more than 25 °C for 6" motors.
Maximum amount of sand in water: 150 g/m3.
Continuous operation .
Replaceable winding motor for SD, SDP, SDN pumps.
Two-pole asynchronous motor, frequency 50 Hz, speed 2900 rpm
NEMA Connector Sizes.
Voltage:
Single-phase th: 230 V- up to 2.2 kW for 4 motors.
Three-phase: 230V; 400V.; for 4 engines".
Three-phase: 400 V; 400/690 V, for 6" motors.
Voltage change +6%/-10%.
Start, recommended for powers of 7.5 kW and above: star/delta, soft start or stator resistance.
Special designs for SD, SDP, SDN pumps.
To work with other voltages.
To work at 60 Hz.
For fluids with higher temperature.
FK Engine.
mechanical seal for calpeda 4SD15/17EC pump is in stock
pump calpeda 4SD15/17EC
pump type
innings
pressure
pump power
voltage
pump material
wheel material
pump location
connection type
wheel type
diameter
There are no reviews for this product.