Pump Calpeda A 40-110A/B

Self-Priming Monoblock Centrifugal open impeller pumps.

An anti-back-suction device built into the suction bell prevents back-suction when stopped and re-suctions every time it is turned on.

The pump is self-priming even if it is partially filled with liquid and the suction pipe is completely empty.

Application of pumps A.

Pumps A are used for clean or slightly polluted water with suspended solids up to: 10 mm for pumps A 40, A 50, 15 mm for pumps A 65, A 80, for draining bathtubs, ditches , watering, for domestic and industrial use.

Operating limits for pumps A.

Liquid temperature from -10°C to +90°C.

The ambient temperature is not more than 40°C.

Maximum allowable final pressure in the pump casing: 6 bar (10 bar for A 80-170 pumps).

Continuous operation.

Electric motor for Calpeda A pumps.

Asynchronous 2-pole electric motor, frequency 50 Hz (rpm n = 2900 rpm).

< span style="font-family: Tahoma, Arial, Verdana, Helvetica, sans-serif; font-size: 14px;">A three-phase up to 3 kW - 230/400 V (±10%), from 4 to 7.5 kW - 400/690 V (±10%).

AM: single phase 230V (±10%) with thermal protector.

The capacitor is built into the terminal box.

Isolate class"F".

IP 54 Protective Device.

Designed according to IEC 60034.

Custom made pumps A.

To work with other voltages.

To work at 60Hz.

With IP 55 guard.

Special mechanical seals.

For liquids or elevated temperature environments.

Version with explosion-proof motor according to directive 94/9/CE (ATEX).

Version with base.

We have mechanical seal in stock for calpeda A40-110A/A

Pump Calpeda A 40-110A/B