pump calpeda MXSUM404/A

	pump calpeda MXSUM404/A
Head :	30.5 m
Flow rate:	5 m3/h
Pump power:	0.9 kW
Pump type :	multistage
Voltage :	220V
Pump material :	AISI304
Wheel material :	AISI304
Wheel type :	centrifugal
Pump location :	vertical
Type of connection :	thread
Nozzle diameter :	1 1 /4x1 1/4 inch

Monoblock vertical multistage pumps calpeda MXSUM404/A pump made of stainless chromium-nickel steel, engine cover made of brass .
Suction flare at the bottom and delivery flare at the top.
The motor is cooled by pumped water passing between the motor casing and the outer casing.
Double shaft seal with inserted oil chamber.

Application of MXSU pumps.
Pumps are used for clean water without abrasive particles and substances aggressive to pump construction materials, used in everyday life and in industry , installed in unventilated areas.
In areas subject to short-term flooding.
Working in systems exposed to water flow.
When a silent pump is required.

Operating limits for MXSU pumps.
Liquid temperature not more than 35°C.
Max. pressure allowed in the pump housing: 10 bar.< br>Continuous operation mode.

Electric motor for Calpeda MXSU pumps.
Two-pole induction motor, 50 Hz, 2900 rpm.
MXSU : three-phase 230 V. (±10%); three-phase 400. (±10%).
MXSUM : single phase 230 . (±10%) with thermal protector.
Condenser in control block on demand.
Cable: 2 m long, 4 G 1 mm2, type H07RN8-F.
Isolate class"F".
IP 68 protection.
Dry wrapping with triple moisture resistance.
Designed according to EN 60335-2-41 (CEI 61-69)