Model:
70A50040000Brand:
Calpeda
Очень много
13,448.00грн.
pump type
самовсасывающий до 9мflow selection m3/h
2.8selection by head in m
27Pump Calpeda NGL 4/B
| pump calpeda NGL4/A | |
| Head : | 27m |
| Flow : | 2.8m3/h |
| Pump power: | 0.75kW |
| Pump type : | self-priming up to 9m |
| Voltage : | 380V |
| Pump material : | cast iron |
| Impeller material : | brass |
| Impeller type : | centrifugal |
| Pump location : | horizontal |
| Type of connection : | thread |
| Spigot diameter : | 1x1inch |
Self-priming monobloc centrifugal pump with built-in ejector.
Using NGL pumps.
NGL pumps manufactured by the company Calpeda (Italy) designed for well water supply,
for lifting water containing air or other gases,
to increase the pressure of water flowing to the pump by gravity when working under hydraulic pressure,
to increase the pressure of water from the distribution network (observe local standards),
for clean water or slightly polluted surface water, in garden areas, for washing with a strong water jet.
NGL pump operating limits.
Liquid temperature from 0 °C to +35 °C.
The ambient air temperature is not more than 40 °C.
Maximum allowable final pressure in the pump housing: 8 bar.
Continuous mode.
Electric motor for NGL pumps.
Asynchronous 2-pole electric motor, frequency 50 Hz (2800 rpm).
NGL: three-phase 230/400V ±10%, NGLM: single-phase 230V ±10% with thermal protector.
The capacitor is built into the terminal box.
Isolate class "F".
IP 54 Protective Device.
Design according to EN 60335-2-41 (CEI 61-69).
mechanical seal for calpeda NGL4/A pump is in stock
Pump Calpeda NGL 4/B
pump type
pump type
самовсасывающий до 9м
innings
flow selection m3/h
2.8
pressure
selection by head in m
27
pump power
pump power, kWt
0.75
voltage
voltage, V
380
pump material
pump material
чугун
wheel material
wheel material
латунь
pump location
pump location
горизонтальное
connection type
connection type
резьба
wheel type
wheel type
центробежное
Reviews: 0
There are no reviews for this product.