Model:
72B50020000Brand:
Calpeda
Очень много
11,275.00грн.
pump type
самовсасывающий до 9мflow selection m3/h
2selection by head in m
20.5Pump Calpeda NGXM 2
| calpeda NGXM2 pump | ||
| Head : | 20.5m | |
| Delivery: | 2m3/h | |
| Pump power: | 0.45kw | |
| Pump type : | self-priming up to 9m | |
| Voltage : | 220V | |
| Pump material : | AISI304 | |
| Impeller material : | brass | |
| Impeller type : | centrifugal | |
| Pump location : | horizontal | |
| Type of connection : | thread | |
| Spigot diameter : | 1 1 /4x1inch | |
Self-priming monobloc centrifugal pump with built-in ejector.
Minimum use of plastic materials.
Application:
Well water supply.
For lifting water containing air or other gases.
To increase the pressure of water flowing to the pump by gravity when operating under hydraulic pressure.
To pressurize water from the distribution network (observe local standards).
For clear water or lightly polluted surface water. Garden use.
For washing with a strong water jet.
Operational limits:
Liquid temperature from 0 °C to +35 °C.
The ambient air temperature is not more than 40 °C.
Maximum allowable final pressure in the pump casing: 8 bar.
Continuous mode.
Design:
Electric Motor:
Asynchronous 2-pole motor, 50 Hz (2800 rpm).
NGX: three-phase 230/400V ±10%.
NGXM: single phase 230.±10% with thermal protector.
The capacitor is built into the terminal box.
Isolate class "F".
IP 54 safety device.
mechanical seal for calpeda NGXM2 pump is in stock
Pump Calpeda NGXM 2
pump type
pump type
самовсасывающий до 9м
innings
flow selection m3/h
2
pressure
selection by head in m
20.5
pump power
pump power, kWt
0.45
voltage
voltage, V
220
pump material
pump material
AISI304
wheel material
wheel material
латунь
pump location
pump location
горизонтальное
connection type
connection type
резьба
wheel type
wheel type
центробежное
Reviews: 0
There are no reviews for this product.