Self-priming centrifugal pump Pentax APT 200
PENTAX Pumps AP series are centrifugal self-priming pumps with remote (external) ejector 4” and 2”. They are used in such areas as: water supply in small private households (gas impurities are allowed in water), autoclave boilers, gardening DESIGN FEATURES - cast iron pump housing, inlet and outlet pipes - thread; for PENTAX pumps of the AP series, an aluminum or cast iron motor support can be supplied (for AP100 and AP75); the impeller is made of brass, or Noryl; sealing mechanical mechanical seal - graphite-ceramic; The pump shaft is made of high quality stainless steel. steel AISI 416 (for AP100 and AP75); for AP200 and AP150 on the hydraulic side, the shaft is made of stainless steel. steel AISI 304. Thrust bearings from well-known world manufacturers; temperature range of pumped media from 0 °С - 50 °С; maximum working pressure - 6 bar. ENGINE - continuous action, two-pole, asynchronous. Degree of protection - ІР 44; insulation class - F; The motor stator is made of electrotechnical, sheet steel; for single-phase models, thermal protection is built into the motor; It is the user's responsibility to provide motor protection for three-phase models.
Type | Sizes, mm | ||||||||||||
A | B | C | D | E | F | H1 | H2 | DNA | DNM | I | L | M | |
APT 200 | 125 | 74 | 415 | 220 | 177 | 230 | 112 | 240 | 1” 1/4 G | 1”G | 525 | 230 | 280 |
Pumps | |
Qmax, m3/h | 3.6 |
Hmax, m | 50 | < /tr>
Pump Body | cast iron |
Motor kW | 2.22 |
Engine Mount | cast iron |
Impeller | Noryl |
Mechanical Seal | ceramic |
Motor shaft | AISI 416 steel |
Liquid Temperature | 0- 50 |
Working Pressure | 8 bar |
Class isolation | F |
Protection level | IP44 |
Number of phases | 3 |
Self-priming centrifugal pump Pentax APT 200
There are no reviews for this product.