SANIALARM SFA (France)

SANIALARM

ORIGINAL CONCEPT
Accidental power cuts, limescale buildup on long-term pumps, clogged pipelines are the main causes of rising water levels permanently in the SFA pump.
To protect against such surprises, SFA offers an effective solution that instantly informs you when the pump is overfilled. Allowing you to avoid unwanted exploitation and proceed to the immediate diagnosis of the accident.

OPERATING PRINCIPLE

SANIALARM is fixed on the cover of the SFA pump. The main element is the level sensor, which automatically turns on the sound signal when the water level in the pump exceeds the maximum. The sound signal can be turned off manually by a toggle switch on the body, or automatically when the water level in the body drops to an acceptable level.

PRINCIPLE OF WORK WITH THE EQUIPMENT
SANIALARM consists of a buzzer,  pressure switch, 9 V battery (not included), ON/OFF button, plunger tube. It is possible to connect an external alarm. As soon as the water level in the pump reaches a critical value the buzzer sounds an alarm. This signal must respond.

APPLICATION
Installation is possible on all types of SFA pumps.

OPERATION< br> If SANIALARM gives continuous alarm, set the button to OFF position. (OFF), do not use devices connected to the pump and unplug the power pump from the outlet. After eliminating the cause of the alarm, turn the button back to the position ON. (ON).
Warning: the alarm may reactivate, then stop (large influx of water, temporary traffic jam). Continue to monitor the instrument, but do nothing,  ;until this repeat times or the beep becomes continuous.

MAINTENANCE
2 – Replace the battery once a year.

WARRANTY
The SANIALARM device is warranted for 2 years if the installation and care carried out in accordance with instructions.

INSTALLATION OF SANIALARM ELEMENTS

< strong>Install 2 x 1.5V batteries (not included) r) in the case

Drill a 10mm diameter hole on the top cover of the pump housing

Apply silicone sealant before mounting the SANIALARM sensor tube

Fix SANIALARM on the case