Chopper pump for forced sewerage SANISLIM , SFA (France)

SANISLIM forced sewage macerator pump

SANISLIM  the most compact (only 130 mm thick) household model from the range of attached macerator pumps for toilet bowls with horizontal outlet. Designed to pump out used water from the toilet, shower, bidet and washbasin. 

APPLICATION
This unit is a compact  pump station designed to remove waste water from a draining toilet, shower, bidet or washbasin. 
safety and electromagnetic compatibility.

INSTALLATION
equipment, if any. The unit must be freely accessible for inspection and maintenance purposes.
Installation and operation of the unit must comply with local regulations and EN 12056-4.
Position the pump so that it does not touch the wall of the room, the pump on a perfectly flat floor surface to prevent the proper operation of the anti-vibration clamps, properly fix the outlet pipe system so that the distance between the fixings does not exceed one meter.

OPERATING PRINCIPLE SANISLIM SEWER PLANT
After draining the water and raising the water level in the housing, the pump motor automatically turns on and sets the knives in motion, which crush the particles present in the contaminated liquid within 4-5 seconds. The crushed effluent is removed and the pump is ready for operation again. 

For this model, it is possible to install a special sound alarm - SANIALARM. 
Accidental power outages or the accumulation of technical sediment leads to an increase in the level of wastewater in the pump and, as a result, in the connected plumbing. SANIALARM will warn you if the water in the pump rises above the operating level. SANIALARM is easily installed on the cover of the SFA pump and has a pressure sensor (membrane switch) and, if the water volume exceeds the maximum allowable level, the alarm emits a long sound (about 80 dB) until the problem is turned off and the problem is corrected.

ELECTRICAL CONNECTION
Electrical  connection should only be carried out after all necessary connections have been completed.
 Electrical installation must be carried out  by a qualified person. The appliance should be placed in such a way that access to an electrical outlet is provided. This appliance must be connected to earth (class I) and a high sensitivity differential circuit breaker (30mA).
The outlet must be used only for power supply device. If the appliance's cable is damaged, it must be replaced by the manufacturer or its after-sales service to avoid risk.
Regulations and regulations
Comply with the regulations for electrical safety in bathrooms in force in the country of use.

COMMISSIONING
Once the electrical and hydraulic connections have been made, flush the water several times. The toilet must not leak. in case of a long absence, it is necessary to shut off the general water supply and protect the installation from frost by draining the water from the pump housing.

CLEANING AND REMOVING LIME
To remove limescale and cleaning the pumping station and the toilet bowl, you should regularly use a specially decalcifier designed for this purpose or a solution of 1 liter of 9% vinegar in 5 liters of water.

WARRANTY CONDITIONS< /strong>
The warranty period of the device is 2 years, starting from the date of purchase, provided that it is installed and used in accordance with the instructions.
CAUTION!!! The warranty applies only to the withdrawal of the toilet  paper, excrement and sewage. The warranty does not cover damage to the device caused by penetration of foreign bodies such as: cotton wool, tampons, sanitary napkins, panty liners, food, condoms, hair, metal, wood or plastic objects, or by pumping liquids such as oils. or solvents.