Sewage pumping station SANIFOS 250, SFA (France)
SANIFOS® 250 sewage pumping station
Underground pumping station / 1 Pump
< p>
PUMPING STATIONS SANIFOS®
GRAY WATERS + BLACK WATERS
Toilet, bathroom, kitchen and laundry
Grinder ProX K2 Cutter / Vortex Free Flow Impeller
HIGH-PERFORMANCE
- SFA Grinding System
- Max head (Q = 0 l / min): 14 m
- Flow rate: 11 m3/h
- 250 liter tank
EASY INSTALLATION AND MAINTENANCE
- The station comes pre-assembled with hydraulics, shut-off and check valves
- Automatic operation of the pumping station
- Specially designed for easy maintenance
- Standard rope
RELIABLE ( 1, 2 )
- 1) The lid is held in place with stainless steel screws for maximum safety
- 2) High-density, high-resistance polyethylene reservoir is rotationally molded m.
- Supplied with odor protection, chemical and UV resistant
- Self-cleaning reservoir (on SANIFOS® 110 and SANIFOS® 250 models)
- Integrated thermal motor protection
FLEXIBLE CUSTOMIZABLE ( 3 )
- External or internal installation
- 3) Extra 30 cm section available as accessory (entry depth 611mm)
- 2 vents
- 6 multipipe inlets 40/50/100/110/125
PERFORMANCE ( 4, 5 )
- 4) Autonomous operation of the pump
- 5) New motor design with improved mechanical and thermal resistance< /li>
- Energy saving and reduced motor switching frequency due to large usable volume (Only for SANIFOS® 500)
- SFA Grinding System
< p>EASY TO INSTALL AND MAINTAIN ( 6, 7 )
- 6) The station is equipped with: pre-mounted PVC pressure pipes , tank with check valves, check valves, alarms and low/high floats
- 7) Fixing points
- Height of inlets relative to top covers (FEA) 311 mm
- Cable gland for motor cables and level sensors
- Large opening for easy maintenance
- Rope for lifting pumps < li>Supplied with IP68 waterproof terminal blocks for easy connection and disconnection from the power supply without having to pull the electrical cable
SPECIFICATIONS:< /strong>
- Flow rate: 11 m3/h
- Max. head (Q = 0 l / min): 14 m
- Tank volume: 250 l
- Height of the inlet pipes in relation to the top cover (FEA): 311 mm
- Outlet pressure pipe: DN 40 (outer 50)
- Inlet pipes: 6 x DN 50/40/100/110/125
- Ventilation: 2 x DN 75 < li>ON / OFF level: 470/180 mm
- Maximum incoming waste water temperature: 70 ° C intermittently (max. 5 min)
- Activation system: float switches< /li>
- Thermal overload protection: Yes
- Power supply voltage: 220-240 / 50 Hz
- Motor power consumption: 1500 W
INSTALLATION OPTIONS FOR YOUR SANIFOS®
GROUND Y OPTION*
Before installing the pumping station below ground level, you must be fully aware of the depth of groundwater and the level of soil freezing.
SANIFOS® PUMPING STATION CAN BE INSTALLED INSIDE HOME, GROUND FLOOR.
* For accurate technical information, please refer to installation instructions and professional standards, or consult our technical service
WHERE TO INSTALL YOUR SEWER PUMP STATION?
Effluent flows to SANIFOS® pumping stations by gravity, the height of the inlet pipes relative to the top cover (FEA) is 311 mm (and 611 mm with an additional section), which allows you to install the station at different distances from the building.
< p>WHY DOES YOUR PUMPING STATION NEED GOOD VENTILATION?
Ventilation should be installed at the top of the pumping station in order to:
- evacuate gases generated inside the tanks and prevent any risk of explosion
- avoid pressure loss at the outlet of the pumping station < /ul>
For this, pumping stations are equipped with two ventilation openings.
IF THE SANIFOS® PUMPING STATION IS INSTALLED BELOW THE GROUND LEVEL, ALL PARAMETERS ACCORDING TO THE TECHNICAL DOCUMENTATION MUST BE CONSIDERED.
< p>StandardsOur sewage stations comply with the EN12050-1 standards for pressurized sewage systems and must be installed in accordance with the recommendations of EN12056-4.
ACCESSORIES
SHUT-OFF VALVES
For proper installation and maintenance, check valves must be installed on sewage inlet to the station and also on the pressure pipeline.
OPTIONS FOR SANIFOS®
To increase the height of the inlets from the top cover and the volume of the tank SANIFOS® pumping stations are supplied with additional sections as accessories.
Fully compatible with the tank and cannot be extended.
SANIFOS® 250 with 30 cm additional section ;
FEA: 611 mm
Sewage pumping station SANIFOS 250, SFA (France)
There are no reviews for this product.